Gravimetric feeding in batch mode
Our commitments / concrete solutions / results
We create solutions dedicated for each application, to offer optimized answers supported by a proven technology and a expertise in the dosing of dry materials.
All our industrial solutions comply with the commitments summarized in the table below:
Process & quality |
High accuracy & capability |
Short dosing time |
Respect of the ingredient (low level of mechanical frictions) |
No discrimination of the particles size |
Reduction of the down time |
Quick change of production |
Ease cleaning operation |
Short dismounting time |
Very low maintenance cost - Reliability |
Ergonomics of use - safety |
Simple operation |
Safe sytems for the users |
Clean operation without dust emissions |
Traceability of the results - Batch controller with locked parameters |
Reduce emissions |
Low energy consumption |
Very low losses of material, at change of production |
No wearing parts |
Full discharge of material at the end of production. |

Some examples of application
Production of abrasive parts for brakes for railway - Feeder to be installed in a robotic cell
Feeding in a weighed rotating bowl, aspiration of dust
|
Fine metal powder
density: 5
|
Set point: 178 g - 250 g |
Accuracy requested: +/-2 g
Cycle time < 10 sec
|
 |
Feeding skid for nuclear industry
Feeding in a weighed rotating bowl- fast discharge of the feeder. Our feeder can work with very abrasif material (glass chips), and difficult product to control (glass balls).
|
Glass balls and glass chips
density: 1.7
|
Set point: 30 g - 60 g |
Accuracy requested: +/-1 g
Cycle time < 15 sec
|
 |
Plastic industry - Feeding of zinc stearat
The feeder is mounted on slide in bronze, to ease cleaning operation
|
Zinc stearat
density: 0.6
|
Set point: 11g |
Requested accuracy: +/- 0.15 g
Cycle time < 12 sec
|
|
Filling of cartridges with toner
Integrated solution on trolleys
|
Toners
density: 0.7
|
Set point: 50 -100 g |
Requested accuracy: +/- 0.5 g
Cycle time < 8 sec
|
 |
Micro feeding - integration on an assembly machine with turn table
2a or 3A class feeder
|
Powder xxx
density: 1.5
|
Set point: 0.38 g à 3.98 g |
Accuracy requested: +/- 0.01 g -
Cycle time < 10 sec
|
 |

|
 |

MCPI Batch controllers 
|
Micro feeders |
 |
Performances of micro feeders |
 |
Micro feeders :Ultimate accuracy |
 |
Selection criteria |
 |
Weighing controller |
 |
Download |
 |
Fine dosing principle |
 |
Contact |
 |
|